MR-9722E - Avoider III -- US$48.95
AVOIDER III is an intelligent robot that moves around with its six legs. It has an "eye" of red LED which sends out and receives light signal that allows it to turn and change direction when faced obstacles. It is like having a electronic pet. Assembling and soldering are required with detailed instructions and illustrations.
Power voltage : Mechanical / DC 3V (AABattery x 2pcs) , Circuit / DC 9V (9V Battery )
Power consumption : Electronic Circuit / Approx. 7mA
Mechanical Circuit / Approx. 230mA
Size/ L140 x H110 x W 140mm
Watch a video demo .
MR-9732E - Hyper Line Tracker -- US$48.95
HYPER LINE TRACER follows a black line on white paper, twisting and turning to track the line drawn by you. A light has a characteristic which is absorbed by black color and reflected by white color. Using a red LED and phototransistors, HYPER LINE TRACER distinguishes "black" and "white". Assembling and soldering are required with detailed instructions and illustrations.
Power voltage : Mechanical / DC 3V (AABattery x 2pcs) , Circuit / DC 3V (AA Battery x 2pcs)
Power consumption Electronic Circuit : Approx. 60mA
Mechanical Circuit : Approx. 300mA
Size : L160 x H110 x W 155mm
Watch a video demo.
MR-9742E - MECHA-KAME III -- US$45.95
MECHA-KAME III is a cute robot of a half-sphere shape. It runs and changes the movement using the sound sensor in response to the sound like a handclap. Every time you clap your hands, the robot repeats the following movements: (1) spinning around (2) stopping (3) moving forward (4) stopping. In addition, it has the "whim" mode, where the robot makes a movement randomly from (1) to (4). It will be fun to play a game with a MECHA-KAME III , using this mode. You can also install a pen in the attached pen holder and make the robot draw lines and circles. Assembling and soldering are required with detailed instructions and illustrations.
Power source : "AA" battery x 2pcs (not included)
Power consumption : Approx. 230mA (operating), Approx. 10mA (at standby)
Size : Diameter 110mm x Height 80mm
Weight : Approx. 165g (without batteries and a pen).
Watch a video demo.
MR-9762E - P!MOT -- US$109.95
P!MOT is a two-wheeled robot installed with 8bit micro-controller and the keyboard that enables the programming even without the personl computer . It has the infrared sensor consisting of two infrared LEDs and an infrared detector IC, to see the front ,and the four light sensors to sense the floor . Using these sensor,the conditional commands can be programmed. P!MOT also uses the principle encoder to improve the straight movement and provides three choices of the speed . Let's build up and operate the P!MOT with your own program! Assembling and soldering are required with detailed instructions and illustrations.
Power Source/ Moter Drive Section : "AA"battery x 2 Electronic circuit : 9V Rectangular x 1
Power Consumption / Moter :Max 780mA Circuit:Max 100mA (operating ) 1.8mA(sleeping)
Body size/ H85 x L140 x W 145mm
Program step / Max. 60 step
FOR NEXT Loops / Max. 30 loops.
Watch a video demo.
MR-999E - Robot Arm -- US$79.95
The ROBOTIC ARM TRAINER teaches the basic robotic sensing and locomotion principles, testing your motor skills, as you build and control the Arm. You can command this unit with it's five-switch, wired controller with corresponding lights to grab, release, lift, lower, rotate wrist and pilot sideways 350 degrees. After assembly, observe the dynamics of gear mechanisms through the transperent Arm. Five motors and five joints allow flexibility and fun! For educators and home schoolers. You will find the Robotics Technology Curriculum (optional) and Personal Computer Interface (optional) very useful tools. Assembling and soldering are required with detailed instructions and illustrations.
ROBOT ARM has 5 joints operated by 5 motors. You can operate it freely by its controller and a small light bulb at each joint lights up during operation.
Specifications:
Five Axes of motion:
. Base Right / Left 350 degrees
. Shoulder 120 degrees
. Elbow 135 degrees
. Wrist rotate CW & CCW 340 degrees
. Gripper Open & Close 50 mm ( 2 in )
Product Dimensions:
. Max Length Outwards = 360 mm ( 14.2 in )
. Max Height Upwards = 510 mm ( 20.1 in )
. Max Lifting Capability = 130g ( 4.6 oz .)
Control Box - 5 switch controller
Power Source : "D" Battery x 4 (not included)
Power Consumption (per each Unit) : 300mA (no-load)
Lifting Capacity : 130g
Weight : Robot Arm Approx .1,050g (without Batteries), Control Box Approx.15(including cable)
Size : Max. height upwards 510mm , Max.length outwards 360mm
Watch a video demo.
MR-9792E - Moon Walker II -- US$39.95
MOON WALKERII is the walking robot with two sensors, the light sensor which catches the change in the light as you shade the dome by your hand and the sound sensor which senses the noise such as a hand clap. It walks forward for a few seconds with four legs when either sensor senses the change then automatically stops. Assembling and soldering are required with detailed instructions and illustrations.
Circuit Voltage : 1.5V "AA" Battery x1 (not included)
Circuit Current : Operating 200mA, Non-operating 0.3mA
Size : H130 x L101 x W 101 mm
Weight : Approx .170g (without Batteries)
Watch a vide demo.
MR-9592E - Medusa II -- US$39.95
This walking robot named MEDUSAII has a sound sensor. It moves forward for 8-9 seconds with four legs then automatically stops. Assembling and soldering are required with detailed instructions and illustrations.
Power Source : "AA" Battery x1 (not included)
Power Consumption : Operating 210mA, Non-operating 0.3mA
Size : H130 x 101 x 101mm
Weight : Approx .170g ( Battery not included)
MR-9642E - Sumo Man -- US$46.95
The super warrior SUMO ROBOT can be controlled to assail and overpower its opponent or retreat to prepare for battle. An infrared sensor beam is emitted when detecting an opponent. Upon detection, it instructs the brain of SUMO to "charge", thereby creating a bonafide wrestling match! You can be the referee (gyoji) and decide who the grand champion (yokozuna) will be. Buy two and let the SUMO ROBOT (wrestling) match begin! Assembling and soldering are required with detailed instructions and illustrations.
Specifications:
Movement: 2 tractor style wheels powered by 1 - DC motor.
Control: Light Sensor/detectable range: Approx. 350mm (max).
Power Source: "AA" x 2 each (electronic circuit), "AA" x 2 each (mechanical).
Size: 130 x 137 x 120mm . Timer range: 0.5 - 7.0 seconds.
Battery life: Approx. 120 minutes (continuous operation).
Watch a video demo.
MR-9002E - Spin Shooter -- US$43.50
The award winning Soccer Robot has been redesigned to create more excitement and interaction. A third motor has been added to this ultra fantastic robot: Soccer Jr. The third motor is used to catch and shoot a ball (included). Now, there may be many hours scoring goals on the living room coffee table with Soccer Jr.
Easy-to-follow, step-by-step instructions allow you to build this exciting interactive robot. Soccer Jr. has six operational legs, a retrieving and kicking mechanism, and a wired controller to activate movement and ball control. It runs forward, backward, turns left or right, and executes 360-degree turns. It will even help develop your hand/eye coordination skills. Play games, tournaments, and surprise friends with great moves.
After you have perfected your shooting skills and want to learn something about robots, our highly acclaimed set of instructions allow you to explore. Discover the History of Robots, Mechanism of three motor drive systems, Mechanism of legged drive system, and Investigate Wired Remote Control Systems. Assembling and soldering are required with detailed instructions and illustrations.
Specifications:
Power Source: AA battery x 4 pieces (not included)
Movement: 6 legs driven by 2 dc motors and 1 dc motor for catch, carry, and shooting
Control: Wire remote.
Power usage: Max approx. 900mA (3 motors operating)
Battery duration: Approx. 2.5 hrs averaging at 550mA (continuous operation average)
Size: Body W85 x H140 X D 170 mm | Controller W95 x H126 x D 31 mm (wire 2cm )
Watch a video demo.
MR-9001E - Star Shooter -- US$43.50
The new speedy design of Soccer Pro is destined for action packed, unparalleled excitement. A third motor and hypersonic wheels have been added for your playing pleasure. Soccer Pro's additional motor is used to catch and shoot a ball (included). Its incredible fast track wheel system powers this unit to make unbelievable sonic maneuvers and can thrust you down the sideline for explosive break-a-ways. This unit will be a mechanical soccer player's dream for those who thrive on speed and coordination.
Easy-to-follow, step-by-step instructions allow you to build this exciting interactive robot. Soccer Pro has two wheels, a retrieving and kicking mechanism, and a wired controller to activate movement and ball control. It runs forward, backward, turns left or right, and executes 360-degree turns. It will even help develop your hand/eye coordination skills. Play games, tournaments and surprise friends with great moves.
After you have perfected your shooting skills and want to learn something about robots, our highly acclaimed set of instructions allow you to explore. Discover the History of Robots, Mechanism of three motor drive systems, Mechanism of wheeled drive system, and Investigate Wired Remote Control Systems. Assembling and soldering are required with detailed instructions and illustrations.
Specifications:
Power Source: AA battery x 4 pieces (not included)
Movement: 6 legs driven by 2 dc motors and 1 dc motor for catch, carry, and shooting
Control: Wire remote.
Power usage: Max approx. 900mA (3 motors operating)
Battery duration: Approx. 2.5 hrs averaging at 550mA (continuous operation average)
Size: Body W130 x H77 X D 120 mm | Controller W95 x H126 x D 31 mm (wire 2cm )
Watch a video demo.
MR-9003E - Air Shooter -- US$43.50
AIR ZINGER Robot kit will blow you away! Building on air technology, OWI has created a robot kit that can inhale or blast out a ball (included) through its cannon like loader. Zigging and zagging is no problem with its wired controller. You can easily move forward, backward, left and right. What is amazing, is the whirl wind effect you create when you activate Air Zinger's wind magnum propeller. When the propeller is activated to retrieve the ball, it is like watching a Largemouth bass inhale its lunch. On command, its special compartment stores the ball and launches it. It's all about full-throttle competition; who can beat whom? You can create your own games, tournaments, and rules.
Quick and easy to assemble, this clever little robot is hard to resist. Children love to build. The kit challenges cognitive skills, help develop fine motor skills and hand-eye coordination. It is the perfect gift for anyone aged 14 or older. Assembling and soldering are required with detailed instructions and illustrations.
Specifications:
Power Source: AA battery x 4 pieces (not included)
Power consumption: Max approx. 900mA (all 3 motors operating)
Battery duration: Approx. 2.5 hrs averaging at 550mA (continuous operation average)
Size: Body W135 x H130 X D 200 mm | Controller W95 x H126 x D 31 mm (wire 2cm )
Watch a video demo.
MR-011 - OTOUGO King -- US$19.50
It is a robot that senses a sound such as clapping hands. Every time it sense a sound, it repeats forward, stop, turn right, turn left, stop. Idler gear system is adopted as a driving system which the torque of the axis of a motor is transferred directly to the tire. Assembling and soldering are required with detailed instructions and illustrations.
Battery : "AA"x4 (not included)
Size: W120xH40xD179
Consumption current: approx0.3mA (condition of stillness), 100mA (condition of forwarding), 45mA (condition of turning right and left)
Weight: approx 115g (battery excluded).
MR-012 - SENNAZORAR -- US$19.50
It is a line-trace-robot that follows a black line on a white paper using reflected type. Idler gear system is adopted as a driving system which the torque of the axis of a motor is transferred directly to the tire. Assembling and soldering are required with detailed instructions and illustrations.
Battery : "AA"x4 (not included)
Size: W120xH40xD192
Consumption current: approx100mA (two motors operation), 60mA(one motor operation)
Weight: approx 130g (battery excluded)
MR-9692E - Hyper Peppy II -- US$29.95
HYPER PEPPYII is a robot with a built-in sensor which reacts to vibration from sound or physical contact. It moves forward but when it senses a high pitched noise(such as a hand clap) or vibration from physical contact with an obstacles, it retreats by reversing and turning left for a preset time and then continues forward on a new course. You will enjoy its crispy movement. You can learn the mechanism of sound sensor and the ratchet mechanism. Assembling and soldering are required with detailed instructions and illustrations.
Circuit Voltage : 3V "AA" battery x2(not included)
Circuit Current : Approx.400mA
Size : H83 x L115 x W 130mm
Weight : Approx .160g (w/t Batterys)
|
