MOTOR-THINK ENGINEERING-MOTOR (1 PC) -- Gearhead motor -- US$13.50
 
 
Japanese THINK ENGINEERING high quality 6-24V gearhead motor. Part Number: TE-22JM-24-200T1. Detailed specifications . It is used and removed from the equipment. However, it is in excellent condition and fully tested.
MOTOR-TSUKASA-MOTOR (1 PC) -- Gearhead motor -- US$16.50
 
 
Japanese TSUKASA ELECTRIC high quality 6-24V gearhead motor. Part Number: TG-01D-NU-107-A054. The length including shaft is 8cm with diameter 2cm . The shaft length is 1.6cm with diameter 0.5cm . It is used and removed from the equipment. However, it is in excellent condition and fully tested. It is around 28 rpm.
MOTOR-GEARHEAD-MOTOR (1 PC) -- High torque gearhead motor -- US$23.00
 
 
Brand new high torque 9V-24V DC gearhead motor. It has around 29 rpm and can handle 5 -8kg load. The length of the motor is 9.3cm (including shaft) with diameter 3.5cm . The shaft length is 2cm with a diameter 0.5cm . The part number is GC-3642-0002. It is a brand new part. Further bulk discount is available as we have several thousand units in stock.
MOTOR-GEARHEAD-MOTOR (2 PCS) -- High torque gearhead motor -- US$40.00
Two pieces of brand new high torque 9V-24V DC gearhead motor.
CHUNJO-Gearhead Motor (1 PC) -- Chun Jo ( Korea ) Gear head motor --US$25.00
 
 
5V extra high torque DC gearhead motor. It can handle 5Kg load using 5V DC power. The motor is manufactured by CHUN-JO Corporation , South Korea . The motor is used and removed from the equipment, but it is in excellent condition and fully tested.
SERVO-Standard (1 PC) -- Standard Futaba Servo --US$15.00
We do carry full Futaba Servo Collections , please send us an email with Futaba part number and quantities for a competitive quotation.
This is a standard Futaba standard servo that has the following specification:
Manufacturer: Futaba Corporation (RC servo division)
Dimension: 40.4 x 19.8 x 36mm
Weight: 44.4g
Output torque: 3.0kg .cm. Please check Conversion Calculator for Units of TORQUE (e.g. kg.cm, oz-inch etc.)
Control System: +pulse control 1520us neutral
Operation Angle: Rotary system, one side 45 degree or greater (including trim)
Power Supply: 4.8V or 6.0V
Power Consumption: 6.0V 8mA (at idle)
Operation Speed: 0.22 sec/60 degree
This Futaba servo can be directly connected to MIT Handyboard expansion servo connector without any modification. The HB expansion board can drive up to SIX (6) servos and the servo control software library included. The package includes all the parts, nuts, and different size of horns.Some of our OOPIC packages also includes this servo. It is brand new.
To modify the servo to have a 360 degree rotation, please follow the link here.
SERVO-Standard (Pack of 2 PCS) -- Standard Futaba Servo --US$28.00
This is a pack of 2 standard Futaba servos (Part number: SERVO-STANDARD) which includes all the parts. This is great to build your own robots.
SERVO-Standard (Pack of 4 PCS) -- Standard Futaba Servo --US$55.00
This is a pack of 2 standard Futaba servos (Part number: SERVO-STANDARD) which includes all the parts. This is great to build your own robots.
SERVO-Standard (Pack of 6 PCS) -- Standard Futaba Servo --US$82.00
This is a pack of 6 standard Futaba servos (Part number: SERVO-STANDARD) which includes all the parts. This is great to build your own robots.
SERVO-High Torque (1 SET) -- Extra High Torque Servo --US$95.00
This extra high torque Futaba servo has a torque rating 21.0kg .cm. It has the following specifications:
Manufacturer: Futaba Corporation (RC servo division)
Dimension: 59.2 x 28.8 x 49.8 mm
Weight: 4.48oz ( 127g )
Output torque: 264 oz .-in. Please check Conversion Calculator for Units of TORQUE (e.g. kg.cm, oz-inch etc.)
Control System: +pulse control 1310us neutral
Operation Angle: Rotary system, one side 45 degree or greater (including trim)
Power Supply: 4.8V or 6.0V
Operation Speed: 0.2sec/60 degree @6.0V
The package includes all the parts, nuts, and different size of horns. It is brand new part.
NOTE: This servo CANNOT be modified for 360 degree of rotation.
SERVO-High Torque (Pack of 2 PCS) -- Extra High Torque Servo --US$185.00
This is a pack of 2 erxtra high torque Futaba servos (Part number: SERVO-High-Torque) which includes all the parts. This is great to build your own robots.
SERVO-Standard with Wheels (Pack of 2 PCS) -- Standard Futaba Servo with wheels--US$38.00
This is a pack of 2 standard Futaba servos (Part number: SERVO-STANDARD) with attached wheels. The package does not include nuts and different size of horns . It includes a wheel. To modify the servo to have a 360 degree rotation, here is the instructions
MOTOR-RS-755 -- Mabuchi RS-755 with Gear box -- US$65.00
MOTOR-RS-550 -- Mabuchi RS-550 with Gear box -- US$40.00
 
 
Manufacturer: Mabuchi Motors (Japan)
Operating voltage: (RS550) DC 6V-14V , (RS755) DC9V-36V
Gear Ratio: 1:4
Dimension (with metal gear box): 90mm (length)
RS550 datasheet
RS755 datasheet
This high torque DC motor comes with gear box. It has high torque and high speed. The shaft diameter is 3mm . It is great for heavy duty applications. It is brand new.
MOTOR-RS-380 -- Mabuchi RS-380 with Gear box -- US$35.00
 
 
Manufacturer: Mabuchi Motors (Japan)
Operating voltage: DC 2.4V-12V
Torque (7V): 839g .cm Torque (14V): 959g .cm
Speed under 7V without load: 16,200 rpm
Speed under 12V without load: 21,900 rpm
Current drawn: 0.5A -0.7A
Diemnsion (Motor body): 37.8mm (length) x 29.20mm (diameter)
Dimension (with metal gear box): 75mm (length)
RS380 datasheet
This high torque DC motor comes with gear box. It has high torque and high speed. The shaft comes with screw for attachment. It is great for high duty applications. It is brand new.
FAUL-Gearhead Motor (1 PC) -- 6-9V gearhead DC motor --US$13.50
 
Swiss made FAULHABER metal gearhead motor. The part number is "1524E009S" The gear ratio looks like 262:1. The output RPM will be around 15000/262 = 57rpm. This gearhead motor consumes as little as 15-20mA current under load. The length of motor body is around 4.7cm , diameter is 1.4cm , shaft length is 1.3cm , and shaft diameter is 2.2mm . Here is the datasheet . It is used and removed from equipment, but is fully tested and in excellent condition.
COPAL-Gearhead Motor (1 PC) -- 6-9V gearhead DC motor --US$13.50
COPAL gearhead DC motor is great for robotic applications. It has a high torque and consume a little current. The shaft diameter is 2.5mm , and the length of the motor body is 4.2cm (the body of motor and attached gearbox). The diameter of the motor body is 1.5cm The length of the shaft is 1cm . The DC motor is brand new and manufactured by COPAL (Part number: HG16-060-AA-02), JAPAN
HG16 Series Standard Specifications
Gear Ratio:1/60
Tolerance Torque g-cm: 420
N-cm: 4.12
Rated Torque g-cm: 350
N-cm: 3.43
Rated Speed min-1 (r.p.m.): 175
Rated Current: mA 300
No Load Speed min-1 (r.p.m.) 210
Stall Current: mA 1300
Weight (g): 27
SAYAMA1-Gearhead Motor 6-12V gearhead DC motor -- US$13.50
 
 
SAYAMA gearhead DC motor provided a very high torque and little current consumption. The shaft diameter is 2.1mm , and the length of the motor body is 6cm (the body of motor and attached gearbox). The diameter of the motor body is 2cm .The length of the shaft is 0.7cm . The DC motor is used and manufactured by SAYAMA (Part number: IG-22EM-SNC), JAPAN. The motor is fully tested.
SAYAMA2-Gearhead Motor 6-12V gearhead DC motor -- US$13.50
 
 
SAYAMA gearhead DC motor provided a very high torque and little current consumption. The shaft diameter is 0.5cm , and the length of the motor body is 7.9cm (the body of motor and attached gearbox). The diameter of the motor body is 2cm .The length of the shaft is 1cm . The DC motor is used and manufactured by SAYAMA (Part number: IG-22BXM-SUE7-A), JAPAN. The motor is fully tested.
SAYAMA-Gearhead Motor 6-24V gearhead DC motor -- US$45.00
 
 
SAYAMA gearhead DC motor provided a very high torque and little current consumption. The shaft diameter is 0.5cm , and the length of the motor body is 7.8cm (the body of motor and attached gearbox). The diameter of the motor body is 3.5cm .The length of the shaft is 1.5cm . The DC motor is brand new and manufactured by SAYAMA (Part number: RB-35CGM-N574-24), JAPAN. Hard-to-find excellent quality gearhead motor. It is brand new.
STEPPER-Motor-5V(1 PC) -- 5V to 12V 5-lead unipolar stepper motor --US$9.50
 
This is a 5V-12V stepper motor which has 5 leads Unipolar stepper motor. It has an internal resistance of 30 ohm. You can use our stepper driver kits and driver chip to drive it. By modifying a Handyboard , you can add the stepper motor into it. The stepper motor is brand new and manufactured by MINEBEA Electronics Co,. Ltd, Japan . The part number is PM 35L -048-HPH7. It is brand new.
STEPPER-Motor-5V (Pack of 2 PCS) -- 5V to 12V 5-lead unipolar stepper motor --US$18.00
The package contains 2 pcs of STEPPER-Motor-5V.
STEPPER-Motor-9V(1 PC) -- 9V to 24V 6-lead unipolar stepper motor --US$14.50
 
This is a 9V-24V stepper motor which has 6 leads Unipolar stepper motor. It has an internal resistance of 30 ohm. You can use our stepper driver kits and driver chip to drive it. By modifying a Handyboard , you can add the stepper motor into it. The stepper motor is brand new and manufactured by MINEBEA Electronics Co,. Ltd, Japan . The part number is PM 42L -048-TBC2. It is brand new.
STEPPER-Motor-9V(2 PCS) -- 9V to 24V 6-lead unipolar stepper motor --US$27.00
The package contains 2 pcs of STEPPER-Motor-9V
MOTOR-Submarine (Assembled) -- Assembled Mabuchi Submarine Motor-- US$8.75
Manufacturer: Mabuchi Motors (Japan)
Operating voltage: DC 1.5V (one AA battery)
Torque at 1.5V: 4.0g -cm
Speed under 1.5V without load: 8,600 rpm
Speed under 1.5V with load: 6,400 rpm
Current drawn with load: 500mA
Educational Construction in the summer is all about fun with submarine motors! Ever since Mabuchi stopped the production of their underwater motor years ago there have been many disappointed watercraft fans who have take the time to construct a waterproof model boat with no means to power it.
Basic Specifications
- Total length: 123cm
- The Submarine Motor features a suction cup ( 123mm diameter), which can be attached to containers, such as plastic bottles or under the hulls of watercraft models.
- Rudder can be set for auto-steering.
- Set includes type FA-130 Motor, suction cup, rudder, one sided tape and plastic disk (for sticking suction cup onto), and screws.
- Maximum continuous running time: 2hours
- Requires one R6/AA/UM3 Battery (Sold Separately)
MOTOR-Submarine (Kit) -- Unassembled Mabuchi Submarine Motor kit -- US$7.35
Motor Manufacturer: Mabuchi Motors (Japan)
Operating voltage: DC 1.5V (one AA battery)
Torque at 1.5V: 4.0g -cm
Speed under 1.5V without load: 8,600 rpm
Speed under 1.5V with load: 6,400 rpm
Current drawn with load: 500mA
Educational Construction in the summer is all about fun with submarine motors! Ever since Mabuchi stopped the production of their underwater motor years ago there have been many disappointed watercraft fans who have take the time to construct a waterproof model boat with no means to power it.
Basic Specifications
- Total length: 123cm
- The Submarine Motor features a suction cup ( 123mm diameter), which can be attached to containers, such as plastic bottles or under the hulls of watercraft models.
- Rudder can be set for auto-steering.
- Set includes type FA-130 Motor, suction cup, rudder, one sided tape and plastic disk (for sticking suction cup onto), and screws.
- Maximum continuous running time: 2hours
- Requires one R6/AA/UM3 Battery (Sold Separately)
MOTOR-Submarine-Boat (Kit) -- Unassembled Mabuchi Submarine Motor kit with Boat -- US$9.95
 
This is a submarine motor which includes a sucker that can attach to your model ship. The package is water-proof and it provides propulsion to your model on water, and includes a boat. Assembly instructions are included.
Submarine motor comes with boat hull. Suction cup is supplied for easy attachment to boat. Polystyrene boat can be easily modified and painted
MOTOR-Submarine-Float (Kit) -- Unassembled Mabuchi Submarine Motor kit with Float -- US$13.95
The Submarine Motor has been coupled with a 170X 100 mm float. Kit contains an assembly type submarine motor and styrofoam float. Employs one R6/AA/UM3 battery (sold separately).
MOTOR-FA130RA -- Mabuchi FA-130RA small electric motor set -- US$9.00
Manufacturer: Mabuchi Motors (Japan)
Operating voltage: DC 1.5V - 3.0V
Torque at 1.5V: 4.0g -cm
Speed under 1.5V without load: 8,600 rpm
Speed under 1.5V with load: 6,400 rpm
Current drawn with load: 500mA
Motor axle diameter: 2.0mm
The DC motor comes with battery holder, switch and mounting bracket kit with screws. it also comes with FOUR different gear heads. This motor is a brand new package. It is brand new.
MOTOR-RE140RA -- Mabuchi RE-140RA small electric motor set -- US$9.50
 
Manufacturer: Mabuchi Motors (Japan)
Operating voltage: DC 1.5V - 3.0V
Torque at 1.5V: 5.0g -cm
Speed under 1.5V without load: 7,700 rpm
Speed under 1.5V with load: 5,400 rpm
Current drawn with load: 550mA
Motor axle diameter: 2.0mm
The DC motor comes with battery holder, switch and mounting bracket kit with screws. it also comes with FOUR different gear heads. This motor is a brand new package. It is brand new.
MOTOR-RE260RA -- Mabuchi RE-260RA small electric motor -- US$9.50
Manufacturer: Mabuchi Motors (Japan)
Operating voltage: DC 1.5V - 3.0V
Torque at 3.0V: 10.0g -cm
Speed under 3.0V without load: 11,600 rpm
Speed under 3.0V with load: 8,900 rpm
Current drawn with load: 700mA
Motor axle diameter: 2.0mm
The DC motor comes with battery holder, switch and mounting bracket kit with screws. it also comes with FOUR different gear heads. This motor is a brand new package. It is brand new.
MOTOR-RE280RA -- Mabuchi RE-280RA small electric motor -- US$9.50
 
Manufacturer: Mabuchi Motors (Japan)
Operating voltage: DC 1.5V - 4.5V
Torque at 3.0V: 15.0g -cm
Speed under 3.0V without load: 8,800 rpm
Speed under 3.0V with load: 6,600 rpm
Current drawn with load: 650mA
Motor axle diameter: 2.0mm
The DC motor comes with battery holder, switch and mounting bracket kit with screws. it also comes with FOUR different gear heads. This motor is a brand new package. It is brand new.
MOTOR-RS380PH -- Mabuchi RS-380PH DC Magnet motor -- US$15.00
Manufacturer: Mabuchi Motors (Japan)
Voltage Range : DC 12V
Normal Voltage: DC 7.2V
Normal Load: 100g .cm
Speed at No Load: 16,400 r.p.m.
At normal load -- Speed: 14,200 r.p.m
At normal load --Current: 2.90A
Shaft diameter: 2.30mm
RS380 datasheet
This motor is a brand new package.
MOTOR-Standard -- Mabuchi DC Motor -- US$2.50
The motors are made by the Japanese company Mabuchi. They are normally used to rewind film in Polaroid cameras. For their size, they have a surprisingly high amount of torque. These motors are used in MIT 6.270 LEGO Robot Design contest . It is brand new.
Here are the specifications of the motor:
Manufacturer: Polaroid Co. (Made by a Japanese company called Mabuchi Motors )
No Load Speed @ 13.8 volts: 19,000 rpm
No Load Speed @ 6 volts: approx 7,200 rpm
Stall Torque: 0.0049 N-m 0.043 in -lbf
Nominal Voltage: 6.9 Volts
Overall Length: 35.8 mm 1.41 in
Body Width: 22.3 mm 0.878 in
Body Height: 15.0 mm 0.590 in
Shaft Diameter: 2 mm 0.079 in
Overall Weight: 28 g 0.062 lbs
MOTOR-Mini A -- Mini DC Motor Type A -- US$4.55
This is a hard to find 1.5V tiny DC motor. The motor body length is about 20mm , the body shape is 6mm x 8mm (top view). The shaft diameter is 0.8mm .Great for BEAM robot application. It is brand new.
MOTOR-Mini B -- Mini DC Motor Type B -- US$4.55
This is a 1.5V tiny DC motor. The motor body length is about 20mm , the body shape is 10mm x 12mm (top view). The shaft diameter is 0.8 mm .Great for BEAM robot application. It is brand new.
MOTOR-Mini C -- Mini DC Motor Type C -- US$4.55
This is a 1.5V tiny DC motor. The motor body length is about 28mm , the body diameter is 11mm (top view). The shaft diameter is 1 mm .Great for BEAM robot application. It is brand new.
MOTOR-Mini D -- Mini DC Motor Type D -- US$4.55
This is a 1.5V tiny DC motor. The motor body length is about 32mm , the body diameter is 12mm (top view). The shaft diameter is 1.1 mm .Great for BEAM robot application. It is brand new.
DRIVER-H Bridge (1 PC) -- High Power H-Bridge Driver -- US$38.00
The high current H-bridge driver is suitable for driving high power DC or servo motors. It can replace L293D or SN754410 motor driver on MIT Handyboard system for driving high power motors. The H-bridge driver is capable to drive ONE motor with the maximum current rating 25A and at DC 3.5V-17V. It was designed by Chuck McManis . For the specifications and MIT Handyboard system motor driver replacement, please visit:
http://www.mcmanis.com/chuck/Robotics/projects/h-bridge/h-bridge.html
You can use it as a stand-alone high power motor driver for your system. The high power H-bridge driver kit is fully assembled and tested .
Thanks Chuck!
DRIVER-H Bridge (pack of 2 PCS) -- High current H-Bridge driver ...... US$65.00
Pack of 2 High performance H-bridge driver above. Each L293D or SN754410 can be replaced by 4 H-BRIDGE-DRIVER for extra high power motor operation .
DRIVER-H Bridge (pack of 4 PCS) -- High current H-Bridge driver ...... US$125.00
Pack of 4 High performance H-bridge driver above. Each L293D or SN754410 can be replaced by 4 H-BRIDGE-DRIVER for extra high power motor operation.
|
